New brake lines and changing to side motor mounts instead of front mounts
Converting to Power Brakes with all new lines
New tilt steering column.
New spare tire tub spot welded in place.
Inner rockers before
Inner rocker on drivers side
Inner rocker repairs begin
Painting the engine
Set in and checking manifold clearance with new power brake and steering added
New manifolds mounted. Now starting to add the water pump, pulleys and rest of accessories.
Had to modify the ac bracket since we were using a newer alt bracket instead of the old hanger style.
Dash is painted, new wiper system installed and checking installation of the vintage air unit
Painted, time to start putting everything back together
Start wiring - 100% of the wiring was stripped except for a little behind the dash. 100% new going back in.
Back end is wired.
Dash is getting there.
Dash is done except for the vintage air
Hang one fender and install core support so radiator can be mounted.